Concrete Lifting, The Best Alternative!

Different methods of alternative repair for sunken concrete problems have been introduced to the construction industry in the past years. Of the several methods, concrete lifting has emerged as the best solution to sunken, tilted, and cracked concrete slabs owing to quite a few reasons. Concrete Lifting is a distinctive process of repairing concrete slabs by injecting through the drilled holes a grout or a polyurethane compound which eventually will serve as the new foundation to the expanded and less dense soil underneath the ground. There are a lot of contributing factors that causes a concrete slab to wear down but constant climate change, natural forces and faulty compaction of the soil are the most common. These factors likely cause the damages on the concrete because they eventually result to a loose and uneven foundation. In cases like this it is best to contact for a concrete lifting work in order to get the problem fixed until it is too late.

Either in residential or industrial houses, concrete-made structures or surfaces can be seen almost everywhere. From the floors that we are walking on, down to the driveway and then up to the huge buildings and recreational structures. Since we are very used to seeing these concrete made surfaces around us we tend not to notice the faults and imperfections developed due to poor workmanship, miscalculation of cement mixtures, human interventions and errors, weak ground surface, or simply because of the natural forces like the water, sun and constant climate change.

In the process of concrete lifting, a sunken concrete slab in the driveway, patio, pool deck, runways, walls, and floors will be aligned back to the level of the adjacent concrete slabs and back to its original height. Compared to other alternative or traditional methods of repair, the usual days and weeks spent over to complete the job are just minutes and hours with concrete lifting. This is very ideal to commercial and industrial applications that require immediate access to the refined project. Experts and professionals of the concrete lifting technology would attest that this is a safe method and a cost effective one. With this alternative method, the total expense is just a fraction of the original cost of removal and replacement of concrete.

Unlike any other method of repair, concrete lifting does not require huge equipments to overhaul the irreparable concrete outdoor surfaces. Instead of pulling the entire sunken or cracked slabs using huge machineries, holes are drilled deliberately to serve as pass-throughs for the grout or polyurethane that will be pumped under hydraulic pressure into the area of repair. The idea of concrete lifting may sound simple however it entails expertise and precision on the part of the contractors and construction companies. The task must be monitored as it progresses to check if every thing is done right and to ensure the quality of work.

Instead of removing and replacing it with a newly poured concrete, why not make the most out of it? Don’t replace a sunken, tilted or cracked concrete slab if there is a way to lift and restore it to its original level. Aside from being cost-effective, this process is environment friendly, hassle-free, and not time-consuming at all. It is one way to save our limited natural resources from being used up and it is still best to go for an effective but an economical solution. As long as the damage is not extensive, the concrete lifting technology could quickly provide fixes to sunken, tilted and cracked concrete. Don’t wait for the surface to collapse and sink, try the concrete lifting method sooner than needed in order to avoid complete overhaul of concrete slabs.